full
pattern
#666666
https://visionteknik.com/wp-content/themes/zap/
https://visionteknik.com/
#0095ff
style2

MCT460

MCT460

Get A Quote
MCT460

The MCT460 System design uses a proprietary cable to communicate to an Operator Interface, located away from the processing line. All analog, digital and bus outputs are available at the Operator Interface.

  • New micro controller, high performance, dual core architecture. One core dedicated to NIR signal acquisition, the other programmed to manage computations and communications options
  • Samples entire NIR signal train for increased measurement accuracy
  • Embedded bootloader allows sensor firmware to be upgraded through USB or serial interface
  • Filter wheel speed adjustment through software
  • Temperature controlled PbS detector for enhanced stability
  • Built in cooling panel and Air Purge Assembly
  • Ergonomically sound IP67 cast aluminum enclosure

A Reliable, Rugged and Accurate Transmitter

The MCT460 Transmitter is available in Stand Alone Configuration or System Configuration.

The MCT460 Transmitter Stand-Alone design makes multiple measurements and creates analog, digital and bus outputs directly from the Transmitter as it operates on the processing line.

The MCT460 System design uses a proprietary cable to communicate to an Operator Interface, located away from the processing line. All analog, digital and bus outputs are available at the Operator Interface.

The Near Infrared (NIR) Operating Principle

Light from the lamp is directed through the rotating, narrow band-pass NIR filters. The filters separate the light into NIR wavelengths, selected specifically by PSC for the measurement and application being performed. The NIR light is then directed onto the product being measured, normally on a conveyor belt or moving web.

Subsequently, the light reflected off of the product is captured by a mirror and focused onto a Lead sulfide detector. The detector’s microvolt output is then taken by the on-board “smart” circuit board and converted into percent moisture or other engineering units.

460 Transmitter Improvements
  • New micro controller, high performance, dual core architecture. One core dedicated to NIR signal acquisition, the other programmed to manage computations and communications options
  • Samples entire NIR signal train for increased measurement accuracy
  • Embedded bootloader allows sensor firmware to be upgraded through USB or serial interface
  • Filter wheel speed adjustment through software
  • Temperature controlled PbS detector for enhanced stability
  • Built in cooling panel and Air Purge Assembly
  • Ergonomically sound IP67 cast aluminum enclosure
Download PDF
For full detailed specifications, please download PDF.

seta
paged
Loading posts...
link_magnifier
#5C5C5C
on
loading
off
X